Pindad SS Driptank BLACK V2
⁍ SS 304 Material, Black Plated
⁍ Single or Dual Velocity style deck
⁍ Bigger post holes to fit thicker wires
⁍ Delrin Chuff Cap + Delrin 510 Driptip Adapter
⁍ Large airflow, adjustable, no need to check position
⁍ Top Cap Locking Mechanizm, designed with a stopper to easily attach and detach from the mod
⁍ 22mm diameter, fits most mods
⁍ Large Gold plated velocity style deck for easy builds
⁍ PEEK insulators through out
⁍ Liquid Injection Valve, innovative filling system for easy liquid inserts
⁍ Squonk Mode Ready, can fit to all kinds of Squonker Mods
⁍ Works with Squonker mods such as #TherionBF #DripBox #PicoSqueeze #Vaporflask Squonk
Out of stock
Designed with a lock mechanizm on the top cap, equipped with a stopper to prevent over-turning of the cap when placing it back on to the base. Easily adjust the airflow without even looking at it. With this lock mechanizm, another feature it can be used is for tightening or loosening the atomizer from your mod. Eliminate all needs for tools in case if your atomizer gets stuck to your mod from over-tightening.
It has a valve that will open when you insert the liquid, and will close automatically when you complete the filling process.
Compatible with unicorn bottles, needle tip feeders, standard dripping bottle tips, even Chubby-Gorilla™ bottles!
And with its longer 510 positive pin, best for electricity atomizer short prevention. Also built with less threads, for minimal turning when attaching the atomizer on to the mod.
Spare Parts included :
▸ 2mm flathead screwdriver (for the post screw)
▸ 3mm flathead screwdriver (to change 510 pins)
▸ Squonk Pin LP (Re-engineered Squonk Pin)
▸ Green or Red rubber replacement o-rings
▸ 2x medium sized o-rings
▸ 4x screws
Re-engineered Deck with single Air-pressure hole to reduce leaking when the atty is placed vertically (V2)
|Dimensions||7 x 7 x 3.5 cm|
BLACK, STEEL, ULTEMATE